DIN1P-20-120-1G-15 AC/DC Surge Protective Device P/N, 1ɸ, 2 Wire Plus Ground, Hardwired Input/Output 120V, 20 kA per Mode, 15 Amp Maximum Continuous Operating Current

STABILINE Surge Protective Devices, DIN1 PLUS Series, deliver worry-free performance with an innovative and proven technology design. Models provide surge protection against harmful transient voltages and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads. The DIN1 PLUS is installed/connected in either Series or Parallel with the line and the equipment to be protected. Types contain no line/load sensitive components and therefore can be connected in any circuit orientation. Units respond reliably and repeatedly in less than 1 nanosecond. The fail-safe design incorporates thermal fuse links and TMOV's and dual Component-Level Fusing (CLF) are standard in each unit. All models include and LED to visually indicate that protection is active. Units are self-contained in rugged plastic enclosures and employ twenty millimeter (20mm) MOV's as their key suppression elements. AC Voltage (120V & 250V) types offered in 10 or 20kA per mode / 20 or 40kA per phase, all mode protection L-N, L-G & N-G, DC Voltage (24V & 48V) types offered in 10 or 20kA per mode, L1-G and L2-G protection. All 120V and 250V models ae CETL recognized components per ANSI/UL 1449 3rd Edition (SPD) and are UL 1283 as electromagnetic filter.

• SPD and Filter for Instantaneous Protection of Sensitive Electronics Parallel-Connected Design for use in Series and Parallel Applications deliver worry-free performance with an innovative and proven technology design
• Type 4 SPD for application in Type 2 locations, for Low voltage - 120 Volt type for AC or DC applications, 1ɸ 2-wire plus ground, 20 kA Surge Amp Capacity per Mode, protection of L-N (L1), L-G (L2) and N-G modes, 15 Amp Max, MCOV (AC) rating of 150V
• Low-cost, point-of-use protection Simple and quick installation, units are hard-wired connected via screw terminal (barrier strips) capable of handling conductors from #30 to #6 AWG depending upon application and current ratings
• Reduce maintenance costs Unit enclosure is ABS Plastic UL94-VD polycarbonate, weighs 15 oz and measures an ultra-compact 394" height, 28" width, 228" depth
• Increased Uptime and Higher system reliability, CETL recognized components per ANSI/UL 1449 3rd Edition (SPD) and are UL 1283 as electromagnetic filter